| Cleaning off excess adhesive sealing material |
| –
| It is recommended to use adhesive remover D 002 000 10 as a cleaning solution. Observe the appropriate safety precautions when performing this work. |
WARNING | When cleaning freshly installed glass from the inside in the vehicle, do not press assembly frame outwards. |
|
| –
| First clean painted surface as well as possible using a dry cloth. Remove remaining dirt with adhesive remover D 002 000. 10. |
| –
| Cleaning plastic trim: Allow adhesive sealant to cure (approx. one hour) and then peel off. |
|
|
|
