Polo Mk5
Installing sun blind |
Carry out following work: |
– | Insert right and left carriers -2- into guide rails -3--arrow a-. |
– | Make sure that carriers are in correct position at top -arrow b- and bottom -arrow c- on guide rail. |
– | Push out centring pins -4--arrows a-. |
– | Slot carriers -6- into roller sliders -2-. |
– | Slot roller sliders -2- into guides -8-. |
– | Make sure that the rollers -7- are in correct position in relation to guide rails. |
– | Push in centring pins -4--arrows a-. |
Only in the case of a new pulling rib: |
– | Pull securing pin -5- out. |
– | Test sun blind -1- to make sure it is functioning correctly. |
– | Tighten bolts -5-. Specified torque: 2.5 Nm |
– | Fit handle -4- and tighten screws -3-. Specified torque: 1 Nm |