volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing fuse box cover > < Removing and installing dash panel end trims
Removing and installing glove compartment
Removing and installing glove compartment
Removing
–  Switch off ignition.
–  Remove dash panel end trim on front passenger side → Chapter.
   
–  Unscrew 3 bolts -arrows- (1.5 Nm).
–  Unscrew bolts -1- and -2- in glove compartment (1.5 Nm).
–  Unscrew bolts -3- and -4- (1.5 Nm).
–  Release glove compartment from dash panel.
–  In vehicles with front passenger airbag deactivation, separate connector from key operated switch to deactivate front passenger side airbag -E224-.
–  In vehicles with tyre pressure monitor display, separate connector from tyre pressure monitor display button -E492-.
–  In vehicles equipped with glove compartment cooling, disconnect air conditioning duct from glove compartment.

Installing
–  Install in reverse order of removal.
   

Removing and installing fuse box cover > < Removing and installing dash panel end trims