Polo Mk5
Removing and installing parts of ABS system on front axle |
1 - | Wheel bearing housing |
2 - | Hexagon socket head bolt, 8 Nm |
3 - | Speed sensor |
q | Before inserting sensor, clean hole inner surface and coat with high-temperature paste G 052 112 A3. |
q | Removing and installing → Chapter. |
4 - | Splash plate |
5 - | Torx bolts, 12 Nm |
6 - | Wheel hub with wheel bearing |
q | The ABS sensor ring is located in the wheel hub → Fig. |
q | Pressing out and in → Running gear, axles, steering; Rep. gr.40. |
7 - | Brake disc |
8 - | Torx bolt, 4.5 Nm |
|