Polo Mk5
Removing and installing parts of anti-lock brake system on rear axle (disc brakes) |
1 - | Rear axle beam |
2 - | Brake line |
3 - | Handbrake cable |
4 - | Torx bolt, 4 Nm |
5 - | Brake disc |
6 - | Cap |
q | Pressing off and driving in → Running gear, axles, steering; Rep. gr.42. |
7 - | 12-point nut (self-locking) |
q | Renew each time after removal → Running gear, axles, steering; Rep. gr.42. |
8 - | Wheel hub with wheel bearing |
q | ABS sensor ring is installed in wheel bearing → Fig.. |
q | Removing and installing → Running gear, axles, steering; Rep. gr.42. |
9 - | Hexagon bolt |
q | Specified torque → Running gear, axles, steering; Rep. gr.42. |
10 - | Splash plate |
11 - | Stub axle |
12 - | ABS speed sensor |
q | Before inserting sensor, clean hole inner surface and coat with high-temperature paste G 052 112 A3. |
q | Removing and installing → Chapter. |
13 - | Hexagon socket head bolt, 8 Nm |
|