volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Separating brake pedal from brake servo > < Assembly overview - brake pedal

Polo Mk5

Assembly overview - brake pedal, left-hand drive
Assembly overview - brake pedal, left-hand drive
  WARNING
The brake pedal travel must not be restricted by additional floor coverings.
Before installing, grease all mounting points with polycarbamide grease -G 052 142 A2-.
The brake light switch is located on the brake master cylinder.
   
1 - Pedal cluster
q   Removing and installing → Chapter.
2 - Self-locking hexagon nut, 25 Nm
q   Always renew after removing.
3 - Sleeve bearing
4 - Brake pedal
q   Removing and installing → Chapter.
5 - Cap
6 - Ball socket
7 - Support
q   For ball head of brake servo plunger rod.
8 - Pivot pin
q   May be fitted only once because the tabs will break off when dismantled.
9 - Sleeve bearing

   

Separating brake pedal from brake servo > < Assembly overview - brake pedal