volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing brake pads, brake caliper FN 3

Polo Mk5

Removing
Removing
Mark brake pads/linings when removing if they are to be reused. Fit in same position when installing, or braking will be uneven.
–  Remove wheels.
   
–  Lever brake pad retaining spring out from brake caliper -arrow- with a screwdriver and remove.
  N46-0006
–  Remove cover caps -arrows-.
  A46-0086
–  Unscrew both guide pins -arrows- and remove from brake caliper.
–  Remove brake caliper and secure with wire so that weight of brake caliper does not strain or damage brake hose.
–  Take brake pad out of brake caliper or from brake carrier.
Cleaning:
  WARNING
Do not blow out brake system with compressed air; the resulting dust constitutes a health hazard!
–  Thoroughly clean brake carrier and contact surfaces for brake pads and remove corrosion.
–  Clean brake caliper, in particular the bonding surface for the brake pad. It must be free of adhesive and grease residues.
Use only methylated spirits for cleaning the brake caliper housing.
  A46-0087

Installing > < Removing and installing brake pads, brake caliper FN 3