volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing brake light switchF, left-hand drive > < Installing

Polo Mk5

Removing and installing brake servo pressure sensorG294
Removing and installing brake servo pressure sensor -G294-
Only in vehicles with petrol engine and dual clutch gearbox.
Removing
  Note
The vacuum line does not have to be removed.
   
–  Release connector -2- at brake servo pressure sensor -G294--1- and pull connector off.
  N47-10192
–  Release clip with a pair of pliers -1-.
–  Carefully prise brake servo pressure sensor -G294--2- off.
Installing
Install in reverse order. Note the following points:
–  Carefully connect brake servo pressure sensor -G294- to vacuum line so that sensor engages correctly.
  A47-10021

Removing and installing brake light switchF, left-hand drive > < Installing