volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Pre-bleeding brake caliper > < Removing

Polo Mk5

Installing
Installing
The surfaces of the piston and seal must be cleaned only with methylated spirits and then dried.
–  Apply a thin coat of assembly paste G 052 150 A2 to piston and seal before inserting.
   
–  Place protective cap with outer sealing lip on piston.
  N47-0079
–  Insert inner sealing lip into groove in cylinder using wedge 3409.
When doing this, hold piston in front of brake caliper.
  N47-0081
–  Turn piston to right into brake caliper with piston resetting appliance -T20146-; do not damage protective cap.
  N46-10156

Pre-bleeding brake caliper > < Removing