Volkswagen Workshop Service and Repair Manuals > Polo Mk5 > Heating, ventilation, air conditioning system | Heating, air conditioning | Air conditioner | Repair work on refrigerant circuit which may be performed only in appropriate workshops by specially trained mechanics | Removing and installing air conditioner compressor

Installing

Note

t	Ensure that dowel sleeves -6- are properly seated.

t	Observe remarks on installation of air conditioner compressor → Chapter.

t	If a new air conditioner compressor is installed, a „compressor run-in“ must be carried out → Chapter.

–	Specified torque setting of securing bolts -5- for the air conditioner compressor -1- is 25 Nm.

–	Specified torque setting of securing bolts -4- for the refrigerant lines -2- and -3- is 25 Nm.

–	Fill with refrigerant at pressure end.