volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Bleeding clutch system > < Removing

Polo Mk5

Installing
Installing
Install in the reverse order of removal, observing the following:
   
–  Bolt slave cylinder to gearbox -arrows- → Item.
–  Insert pipe/hose line -B- into slave cylinder to stop.
–  Press in clip -A- to stop.
–  Press pipe/hose line into support -C- on gearbox.
–  Bleed clutch system after installing slave cylinder → Chapter.
–  If the air filter was removed, it must now be reinstalled → Rep. gr.23 or → Rep. gr.24
  A30-0062

Bleeding clutch system > < Removing