| –
| Turn torque converter towards gearbox using light pressure
until notch in hub -arrow- engages in follower of
pump gear and torque converter can be felt to slip in place. |
| The torque converter is properly inserted when it can easily
be turned by hand and is seated equally deep in gearbox around the
entire circumference. |
WARNING | If the torque converter is improperly installed, the follower
of the converter or ATF pump will be destroyed when the gearbox is
bolted onto the engine. |
|
| Torque setting for drive plate to torque converter → Chapter. |
|
|
|
