Polo Mk5
Assembly overview - hydraulics (RHD) |
1 - | Brake fluid reservoir |
2 - | Supply hose |
3 - | Seal |
q | The seals must be located in supply hose |
4 - | Master cylinder |
q | Removing and installing → Chapter |
5 - | Clip |
q | Pull clip out to stop to remove pipe/hose line |
6 - | Retainer |
q | Renew only with master cylinder removed |
q | Removing → Fig. |
q | Pressing on → Fig. |
7 - | Mounting bracket with clutch pedal |
8 - | Hexagon nut |
q | → Item |
9 - | Brake lines |
q | Various number |
10 - | Bracket |
q | Secured to body |
11 - | Bracket |
q | Secured to body |
q | For brake lines and pipe/hose line |
12 - | Pipe/hose line |
q | Determine according to → Electronic parts catalogue (ETKA). |
13 - | Seal / O-ring |
q | Pull onto line connection |
q | Insert with brake fluid |
q | Seals/O-rings are adapted to material of line connection → Fig. |
q | Allocation → Electronic parts catalogue (ETKA) |
14 - | Hexagon bolt |
q | → Item |
15 - | Clip |
q | Pull out clip to stop to remove and install pipe/hose line |
16 - | Bleeder valve |
q | Bleeding clutch system → Chapter |
17 - | Dust cap |
18 - | Slave cylinder |
q | Removing and installing → Chapter |