| Checking selector mechanism |
| Faults which can be detected electrically can be determined with guided fault finding. In the case of mechanical faults, skill is required to localise and repair a faulty system or defective »part« → Chapter. |
| It must not be possible to start the engine in the selector lever positions „R“, „D“ or „S“. |
| When selector lever is shifted to position „N“ at speeds above 5 km/h, solenoid for selector lever lock must not engage and block selector lever. Selector lever can be shifted into a driving range. |
| When travelling at speeds below 5 km/h (almost stationary) and shifting into selector lever position „N“, solenoid for selector lever lock should only engage after about 1 second. Selector lever cannot be shifted out of „N“ position until brake pedal is depressed. |
|
|
|
