volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Antifriction bearings > < General repair notes|Tools

Polo Mk5

Gearbox
   
Gearbox
The gearbox has a hole in the housing.
–  Make sure no small parts drop into this hole during installation work.
–  Cover the hole with a cloth before installation work.

Always make sure that no dirt can enter an »open« gearbox.
t  If gearbox covers have been unbolted or gearbox has no fluid, do not run engine. Do not tow vehicle.
t  First thoroughly clean connecting points and surrounding areas and then loosen bolts.
t  When installing, check for proper seating of dowel sleeves between engine and gearbox.
t  Place removed parts on a clean surface. Cover parts to prevent soiling. Use plastic sheeting and paper. Use lint-free cloths only!
t  Install only clean parts; do not remove Genuine parts from packaging until immediately before installing.
t  If repair work cannot be performed immediately, carefully cover opened components.
   
In some vehicles, a cover is fitted over the engaging levers.
The cover prevents dirt getting in.
Torque setting: 8 Nm
  N34-11590

Antifriction bearings > < General repair notes|Tools