Polo Mk5
Assembly overview - parts of cooling system, body side |
1 - | Radiator |
q | Removing and installing → Chapter. |
q | After renewing, renew entire coolant → Chapter |
2 - | O-ring |
q | Renew. |
3 - | Upper coolant hose |
q | Secured to radiator with retaining clip. |
q | Check for secure seating. |
4 - | Coolant hose |
5 - | Cowling |
6 - | 10 Nm |
7 - | Retaining clip |
q | Check for secure seating. |
8 - | Bracket |
q | For electric fan. |
9 - | Connector |
10 - | Radiator fan |
11 - | To coolant pipe |
12 - | Expansion tank |
q | Test cooling system for leaks using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/8-. |
13 - | Cap |
q | Check using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/9-. |
q | Test pressure: 1.4…1.6 bar. |
14 - | Lower coolant hose |
q | Secured to radiator with retaining clip. |
q | Check for secure seating. |
15 - | Radiator fan thermal switch -F18-, 35 Nm |
q | For electric fan. |
Switching temperatures |
q | 1st level on 92…97 °C, off 84…91 °C |
q | 2nd level on 99…105 °C, off 91…98 °C |
16 - | Bracket |
q | For radiator |
q | Note installation position. |
q | Note various versions. |
17 - | 10 Nm |