volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Fuel supply, gas operation > < Removing and installing radiator

Polo Mk5

Removing and installing coolant pump
   
Removing and installing coolant pump
Special tools and workshop equipment required
t  Refractometer -T10007-
t  Hose clip pliers -VAS 6340-
t  Torque wrench -V.A.G 1331-

   
Water pump wrench -V.A.G 1590-
–  Due to modification to securing bolts for coolant pump pulley, the three rounded corners must be filed out to minimum a = 1 mm.
  Note
t  The integrated coolant pump seal must not be separated from the coolant pump.
t  Damaged or leaking coolant pumps must be replaced complete with seal.
Removing
–  Drain coolant → Chapter.
–  Removing poly V-belt → Chapter.
–  Remove coolant pump pulley.
Installing
Installation is carried out in the reverse order. When installing, note the following:
–  Install coolant pump in cylinder block.
–  Tighten securing bolts to 25 Nm.
–  Tighten coolant pump belt pulley to 20 Nm.
–  Install poly V-belt → Chapter.
–  Replenish coolant → Chapter.
  N19-0017

Fuel supply, gas operation > < Removing and installing radiator