Note | t
| If an exchange cylinder head is installed, all the contact surfaces between the supporting elements, roller rocker fingers and the running surfaces of the camshaft must be oiled before the cylinder head cover is installed. |
| t
| The plastic protectors fitted to protect the open valves must be removed only immediately before the cylinder head is fitted. |
| t
| If the cylinder head is replaced, all the coolant in the system must also be renewed. |
| t
| Removing and installing intake manifold and injectors → Chapter. |
| Removing and installing cylinder head → Chapter. |
| Removing and installing camshaft housing → Chapter. |
| Removing and installing timing chain and drive chain for oil pump → Chapter. |
|
|
|
