volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Renewing crankshaft sealing flange - flywheel end ( assembly tool T10017 ) > < E - Checking sender wheel installation position on crankshaft

Polo Mk5

F - Re-pressing sender wheel
F - Re-pressing sender wheel
   
–  Secure assembly tool -T10134-to crankshaft flange using hexagon socket head bolts -A-.
–  Hand tighten both hexagon socket head bolts.
–  Push assembly tool -T10134- by hand to sealing flange.
  N13-10044
–  Screw hexagon nut -E- onto threaded spindle by hand until it is in contact with assembly hub -C-.
  N13-10084
–  Tighten hexagon nut of assembly tool -T10134- to 40 Nm using torque wrench -V.A.G 1331- and tool insert AF 24 -V.A.G 1332/11-.
–  Check installation position of sender wheel on crankshaft again. → Chapter
If dimension -a- is too small again:
–  Tighten hexagon nut for assembly tool -T10134- to 45 Nm.
–  Check installation position of sender wheel on crankshaft again → Chapter.
  N13-10085

Renewing crankshaft sealing flange - flywheel end ( assembly tool T10017 ) > < E - Checking sender wheel installation position on crankshaft