Polo Mk5
|
1 - | 3 Nm |
Note
t | Self-tapping screws are used in production for securing upper part of air filter housing to lower part of air filter housing and to air intake connecting piece. When these screws are loosened or tightened using a power tool, the threads in the upper part of the air filter housing may be damaged. |
t | Therefore, the use of a power tool can only be allowed when: |
t | the maximum speed of the power tool is 200 rpm, |
t | and the tightening torque is set to a maximum of 3 Nm. |
2 - | Air filter housing - upper part |
3 - | Seal |
4 - | Non-return valve |
5 - | Hose |
q | To camshaft housing |
6 - | Intake hose |
q | With air intake connecting piece |
7 - | Spring-type clip |
q | Remove and install using hose clip pliers -VAS 6340- or spring-type clip pliers -VAS 5024A- |
8 - | Seal |
9 - | Rubber grommet |
10 - | Air filter housing - lower part |
q | Removing and installing → Chapter |
11 - | Filter element |