Polo Mk5
| Assembly overview - fuel rail with injectors |
| 1 - | Supply line |
| q | Check for secure seating |
| q | Secure with spring-type clips |
| q | From fuel filter |
| 2 - | 7 Nm |
| 3 - | Securing clip |
| q | Note version |
| 4 - | Cable guide |
| q | Clipped onto fuel rail |
| 5 - | Fuel rail |
| 6 - | Breather valve |
| q | For fuel system |
| q | Bleeding fuel system → Chapter |
| 7 - | Protective cap |
| q | For breather valve |
| 8 - | Securing clip |
| q | Observe proper seating of injector |
| 9 - | O-ring |
| q | Renew |
| q | Before installing lightly moisten with clean engine oil |
| 10 - | No. 4 cylinder injector -N33- |
| q | No. 1 cylinder injector -N30- |
| q | No. 2 cylinder injector -N31- |
| q | No. 3 cylinder injector -N32- |
| q | Removing and installing → Chapter |
