Polo Mk5
| Assembly overview - intake manifold |
| 1 - | Intake manifold |
| 2 - | Seal |
| q | Renew |
| 3 - | 7 Nm |
| 4 - | Throttle valve module -J338- |
| q | Clean → Chapter |
| q | If renewed, erase learnt values and adapt engine control unit to throttle valve module → Vehicle diagnosis, testing and information system VAS 5051“Guided function” |
| 5 - | 20 Nm |
| 6 - | Hose |
| q | To brake servo |
| 7 - | O-ring |
| q | Renew |
| 8 - | Coolant hose |
| q | For crankcase breather preheater |
| 9 - | Spring-type clip |
| q | Remove and install using hose clip pliers -VAS 6340- or spring-type clip pliers -VAS 5024A- |
| 10 - | Crankcase breather preheater |
| q | To remove and install, remove intake manifold |
| 11 - | 3 Nm |
| 12 - | Hose |
| q | To crankcase breather vacuum valve |
| 13 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
| q | Clipped onto intake manifold |
