Polo Mk5
| Assembly overview - parts of exhaust gas recirculation system |
| 1 - | Bolt |
| q | 9 Nm |
| 2 - | Exhaust gas recirculation pipe |
| q | With flexible joint; do not bend flexible joint - danger of cracking. |
| 3 - | Bolt |
| q | 9 Nm |
| 4 - | Gasket |
| q | Renew. |
| 5 - | Vacuum line |
| q | Do not alter shape |
| q | Vacuum hose schematic diagram → Chapter. |
| 6 - | Bolt |
| q | 9 Nm |
| 7 - | Gasket |
| q | Renew. |
| 8 - | Exhaust gas recirculation pipe |
| q | With flexible joint; do not bend flexible joint - danger of cracking. |
| 9 - | Bolt |
| q | 9 Nm |
| 10 - | Clip |
| q | 4 Nm |
| 11 - | Exhaust gas recirculation cooler |
| q | With integrated exhaust gas recirculation valve -N18- with exhaust gas recirculation potentiometer -G212-. |
| q | Checking changeover → Chapter. |
| q | Removing and installing → Chapter |
| 12 - | Bolt |
| q | 9 Nm |
| 13 - | Gasket |
| q | Renew. |
| 14 - | Gasket |
| q | Renew. |
| 15 - | Exhaust gas recirculation pipe |
| q | With flexible joint; do not bend flexible joint - danger of cracking. |
| 16 - | Nut |
| q | 22 Nm |
| 17 - | Bolt |
| q | 9 Nm |
| 18 - | Gasket |
| q | Renew. |
