t
| Counterhold high-pressure pump toothed belt pulley with counterhold -T10172- and adapters -T10172/8-. 20 Nm, do not turn any further. |
–
| Install centre and lower parts of toothed belt guard. |
–
| Install belt pulley vibration damper: specified torque 10 Nm
+ 90° further. |
–
| Install upper toothed belt guard. |
Further assembly is basically the reverse of the dismantling
sequence. In the process, note the following: |
t
| Ensure that fuel hose connections are tight. |
t
| Do not interchange supply line and return line (return line
blue or with blue marking, supply line white). |
–
| Install wheel housing liner. |
|
|
|