Polo Mk5
| Assembly overview - poly V-belt drive with tensioning element and air conditioner compressor |
| 1 - | Poly V-belt |
| q | Mark direction of rotation before removing. |
| q | Check for wear. |
| q | Do not kink. |
| q | Removing and installing → Chapter |
| 2 - | Poly V-belt tensioning element |
| q | Swing with open-end spanner to slacken poly V-belt → Chapter |
| 3 - | Belt pulley and vibration damper |
| q | Assembly through offset holes only possible in one position |
| 4 - | Bolt |
| q | Renew. |
| q | Use only genuine bolts → Parts Catalogue. |
| q | 10 Nm + 90° |
| 5 - | Dowel sleeves |
| q | Check for correct seating in ancillary bracket. |
| 6 - | Bracket |
| q | For ancillaries |
| q | Removing and installing → Chapter |
| 7 - | 20 Nm + turn 180° further. |
| q | Renew. |
| 8 - | Alternator |
| q | Removing and installing → Rep. gr.27 |
| 9 - | Air conditioner compressor |
| q | Removing and installing → Rep. gr.87 |
| 10 - | Dowel sleeves |
| q | Check for correct seating in ancillary bracket. |
