volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing poly V-belt with tensioning element > < Assembly overview - poly V-belt drive with tensioning element and air conditioner compressor

Polo Mk5

Removing and installing poly V-belt without air conditioner compressor
Removing and installing poly V-belt without air conditioner compressor
  Note
The poly V-belt repair kit with tools contains tool -T10367- and illustrated instructions.
Removing and installing
–  Remove noise insulation or skid plate → General body repairs, exterior; Rep. gr.50.
–  Loosen right wheel housing liner in front area.
–  Cut through poly V-belt.
–  Proceed as described in illustrated instructions.
Installation is carried out in the reverse order; note the following:
–  Secure front part of right wheel housing liner again.
–  Install noise insulation or skid plate → General body repairs, exterior; Rep. gr.50.
   

Removing and installing poly V-belt with tensioning element > < Assembly overview - poly V-belt drive with tensioning element and air conditioner compressor