volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
c) Bolting assembly toolT10134 onto crankshaft flange > < a) Securing seal with sender wheel on assembly toolT10134

Polo Mk5

b) Securing assembling toolT10134 with sealing flange on crankshaft flange
b) Securing assembling tool -T10134- with sealing flange on crankshaft flange
l  Crankshaft flange must be free of oil and grease.
l  Engine positioned at TDC No. 1 cylinder
   
–  Screw hexagon nut -B- to end of threaded spindle.
–  Press threaded spindle of assembly tool -T10134- in direction of arrow, until hexagon nut -B- lies against assembly housing -A-.
–  Align flat side of assembly housing on sump side of crankcase sealing surface.
  N13-10045
–  Secure assembly tool -T10134- to crankshaft flange using hexagon socket head bolts -A-.
  Note
Screw hexagon socket head bolts -A- into crankshaft flange (approx. 5 full turns).
  N13-10044
–  To guide sealing flange, screw two M 7 × 35 mm bolts -A- into cylinder block.
  N13-10031

c) Bolting assembly toolT10134 onto crankshaft flange > < a) Securing seal with sender wheel on assembly toolT10134