Volkswagen Workshop Service and Repair Manuals > Polo Mk5 > Power unit | 4-cylinder diesel engine (1.6 l engine, common rail) | Exhaust system | Exhaust gas temperature regulation | Removing and installing parts of exhaust gas temperature control system (Polo, right-hand drive) | Tightening exhaust gas temperature sender 3G 495 (Polo, right-hand drive)

Tightening exhaust gas temperature sender 3G 495 (Polo, right-hand drive)

Tightening exhaust gas temperature sender 3 -G 495- (Polo, right-hand drive)

Special tools and workshop equipment required

t	Torque wrench -V.A.G 1331-

t	Tool set -T10395-

Tightening torque for exhaust temperature sender 3 -G 495- upstream of non-engine-mounted particulate filter (right-hand drive vehicles)

Use torque wrench -V.A.G 1331- with spanner from tool set -T10395/6- to tighten.

WARNING

The torque wrench -V.A.G 1331- must be set to 29 Nm in this case.

Extending the torque wrench -V.A.G 1331- with the spanner from tool set -T10395/6- allows the correct torque of 45 Nm to be achieved.

Lubricate thread of sender using high-temperature paste -G 052 112 A3-.