Polo Mk5
Assembly overview - silencer |
1 - | Separating point |
q | Marked by indentation on exhaust pipe. |
q | As standard, catalytic converter and silencer are installed as a single component. For repairs, silencer and catalytic converter are supplied separately with a repair double clamp. |
q | Cut through connecting pipe at right angle at corresponding separating point → Chapter. |
q | Position repair double clamp at side marks when installing → Chapter. |
q | Before tightening, align cold exhaust system free of tension → Chapter. |
2 - | Retaining ring |
q | Renew if damaged. |
3 - | Silencer |
4 - | 25 Nm |
5 - | 25 Nm |
q | For tunnel bridge |
6 - | Tunnel bridge |
7 - | To catalytic converter |