| When working on the turbocharger, pay careful attention to
the following rules for cleanliness: |
| t
| Thoroughly clean all unions and surrounding areas before disconnecting. |
| t
| Place removed parts on a clean surface and cover. Use only
lint-free cloths. |
| t
| Carefully cover opened components or seal if repairs cannot
be carried out immediately. |
| t
| Install clean components only. Do not remove replacement parts
from packing until immediately before installing. Do not use parts
that have not been stored in their packing (e.g. in tool boxes etc.). |
| t
| Existing transport and protective packaging and sealing caps
must only be removed immediately prior to installation. |
| t
| When making repairs, remove oil from connection and hose ends. |
| t
| When the system is open: Do not work with compressed air. Do
not move vehicle unless absolutely necessary. |
|
|
|
