volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing intake manifold (vehicles with intake manifold flapV157) > < Assembly overview - intake manifold with attachments (vehicles with intake manifold flapV157)

Polo Mk5

Assembly overview - intake manifold with attachments (vehicles without intake manifold flap)
   
Assembly overview - intake manifold with attachments (vehicles without intake manifold flap)
1 - Guide tube
q   For oil dipstick.
2 - Seal
q   Renew.
3 - Gasket
q   Renew.
4 - 8 Nm
5 - Fuel return line
6 - 9 Nm
q  
7 - Intake manifold
q   With intake manifold flap motor -V157- and intake manifold flap potentiometer -G336-.
q   Must not be dismantled.
q   Removing and installing → Chapter
8 - Bracket
q   For exhaust gas recirculation cooler changeover valve -N345-.
9 - 9 Nm
10 - Exhaust gas recirculation cooler changeover valve -N345-
11 - Gasket
q   Renew.
12 - 20 Nm
13 - Connecting pipe
q   To exhaust gas recirculation cooler.
14 - Clamp, 5 Nm
q   Renew.
15 - Connection
q   For exhaust gas recirculation.
16 - 8 Nm
17 - Seal
q   Renew.
18 - Throttle valve module -J338-
q   With throttle valve potentiometer -G69-.
q   Removing and installing → Chapter.
19 - 8 Nm
20 - 9 Nm
21 - Clip

   

Removing and installing intake manifold (vehicles with intake manifold flapV157) > < Assembly overview - intake manifold with attachments (vehicles with intake manifold flapV157)