Polo Mk5
| Assembly overview - installation position of clamp |
| 1 - | Injectors |
| 2 - | Bolt for clamp |
| 8 Nm + turn 180° further |
| 3 - | High-pressure fitting |
| q | Counterhold when loosening the high-pressure lines |
| 4 - | Return lines retaining clip |
| q | Renew. |
| q | Grease the retaining clip lightly before installing the injector. |
| 5 - | Copper washer |
| q | Renew. |
| 6 - | O-ring |
| q | Renew. |
