volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Repairing fuel supply > < Removing and installing fuel gauge sender G 6 in vehicles with 0.5 bar low-pressure fuel system

Polo Mk5

Removing and installing fuel gauge sender G 6, vehicles with 6.0 bar low-pressure fuel system
Removing and installing fuel gauge sender - G 6-, vehicles with 6.0 bar low-pressure fuel system
Removing
–  Remove fuel delivery unit → Chapter.
   
–  Press together retaining tabs -arrows- and remove fuel gauge sender -G- upwards.
–  Release connector lugs on lines -1-, -2- and -3- and disconnect.
Installing
–  Insert fuel gauge sender -G- into guides on fuel delivery unit and press down until it engages.
–  Clip lines on corresponding positions and secure on cup into retaining slots.
  N20-10723

Repairing fuel supply > < Removing and installing fuel gauge sender G 6 in vehicles with 0.5 bar low-pressure fuel system