Volkswagen Workshop Service and Repair Manuals > Polo Mk5 > Power unit | 4-cylinder injection engine (1.2 l direct injection engine, turbocharger) | Enginecrankshaft group, pistons | Cylinder block, gearbox end | Removing and installing crankshaft sealing flange on gearbox side | Pressing sender wheel onto crankshaft flange using assembly toolT10134

Pressing sender wheel onto crankshaft flange using assembly toolT10134

Pressing sender wheel onto crankshaft flange using assembly tool -T10134-

–	Tighten hexagon nut of assembly tool -T10134- to 35 Nm using torque wrench -V.A.G 1331- and tool insert 24 mm -V.A.G 1332/11-.

Note

After hexagon nut is tightened to 35 Nm, a small air gap must still be present between cylinder block and sealing flange.