Polo Mk5
Assembly overview - radiator, radiator fan (Polo) |
1 - | Radiator |
q | Removing and installing → Chapter. |
q | After renewing, renew entire coolant → Chapter |
2 - | Spring-type clip |
3 - | Coolant hose |
q | To expansion tank. |
4 - | Spring-type clip |
5 - | Cap |
q | Check using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/9-. |
q | Pressure relief valve must open at a pressure of between 1.4 and 1.6 bar. |
6 - | Expansion tank |
q | Test cooling system for leaks using cooling system tester -V.A.G 1274 B- and adapter for cooling system tester -V.A.G 1274/8-. |
7 - | 5 Nm |
8 - | Connector |
9 - | Plastic inserts |
q | For securing bolts. |
10 - | Bracket |
11 - | Cowling |
12 - | 5 Nm |
13 - | Radiator fan 2 -V177- |
14 - | Connector |
15 - | Bracket |
q | For connector. |
16 - | Radiator fan -V7- |
q | With radiator fan control unit -J293-. |
17 - | Charge air cooler |
18 - | Spring-type clip |
19 - | Lower coolant hose |
q | To connection for thermostat. |
20 - | Radiator outlet coolant temperature sender -G83- |