volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing gas tank valveN495 > < Gas gauge senderG707

Polo Mk5

Removing and installing fuel gauge sender
Removing and installing fuel gauge sender
Removing
Carry out the following work:
   
–  Release latch -1- and remove protective cover -2-.
–  Emptying the Autogas tank → Chapter
  WARNING
There is a danger of injury due to escaping gas.
The system is pressurised.
Wear suitable protection such as eye protection and protective gloves.
Before opening the system place a cloth around the connection. Then release pressure by carefully loosening the connection.
–  Detach connector from gas gauge sender -G707-.
  N01-10928
–  Remove bolts -arrows-.
–  Carefully pull fuel gauge sender out of fuel tank.
Installing
Installation is performed in the reverse sequence.
Specified torque of bolts -arrows-: 9.7 Nm
  N20-10782

Removing and installing gas tank valveN495 > < Gas gauge senderG707