volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
C - Bolting assembly toolT10134 onto crankshaft flange > < A - Assembling seal with sender wheel on assembly toolT10134

Polo Mk5

B - Attaching assembling toolT10134 with sealing flange on crankshaft flange
B - Attaching assembling tool -T10134- with sealing flange on crankshaft flange
l  Crankshaft flange must be free of oil and grease.
l  Engine positioned at TDC for No. 1 cylinder.
   
–  Screw hexagon nuts -B- to end of threaded spindle.
–  Press threaded spindles of assembly tool -T10134- in direction of arrow, until hexagon nut -B- lies against assembly housing -A-.
–  Align flat side of assembly housing to crankcase's sealing surface on the oil sump side.
  N13-10045
–  Secure assembly tool -T10134- to crankshaft flange with hexagon socket head bolts -A-.
  Note
Screw hexagon socket head bolts -A- into crankshaft flange (approx. 5 full turns).
  N13-10044
–  To guide sealing flange into cylinder block, screw in two M6 × 35 mm bolts -A-.
  N13-10031

C - Bolting assembly toolT10134 onto crankshaft flange > < A - Assembling seal with sender wheel on assembly toolT10134