–
| Pull fuel supply line (blue line or blue marking) -1- off fuel delivery unit. Disconnect push-on connector → Chapter. |
–
| Connect pressure gauge pipe -VAS 6551/5-2- to the fuel return line -1-. |
–
| Put open end of line -VAS 6551/5-2- into a suitable container. |
–
| Connect vehicle diagnostic tester and then carry out guided function „Fuel pump activation (Emptying fuel system)“. |
Note The fuel pump is now activated. |
–
| Repeat procedure, if necessary, until fuel tank is completely empty. |
–
| Check fuel tank for filings. |
–
| Drain fuel pump reservoir of fuel delivery unit. |
–
| Carry out a visual inspection for foreign bodies and filings in fuel pump reservoir and on preliminary filter. |
|
|
|