volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Assembly overview for electro-hydraulic power steering, right-hand drive vehicle > < Removing and installing power steering box, left-hand drive vehicle

Polo Mk5

Removing and installing power steering sensorG250, left-hand drive vehicle
Removing and installing power steering sensor -G250-, left-hand drive vehicle
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-
Removing
  W00-0427
–  Pull connector -1- off power steering sensor -G250-.
  N48-10402
–  Unscrew bolts -arrows-.
–  Pull out power steering sensor -G250--1- from steering box.
Installing
Carry out installation in the reverse sequence, noting the following:
–  Install new seal on power steering sensor -G250-.
  N48-10403
Specified torques
ComponentSpecified torque
Power steering sensor -G250- in steering box6 Nm

   

Assembly overview for electro-hydraulic power steering, right-hand drive vehicle > < Removing and installing power steering box, left-hand drive vehicle