volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Installing: > < Removing and installing front bass loudspeakers
Removing:
Removing:
Before beginning dismantling work, perform the following steps:
–  Switch off ignition and all electrical consumers and remove ignition key.
To renew a loudspeaker, first remove the door trim → General body repairs, interior; Rep. gr.70 or → General body repairs, interior; Rep. gr.70
   
–  Release connector catch on loudspeaker in direction of -arrows- and disconnect connector -1-.
  N91-11239
–  Drill out rivets -arrows- using suitable drill bit and remove loudspeaker.
  Note
t  It is essential that all swarf be removed from the door because otherwise corrosion damage will occur.
t  If, when drilling out rivets, damage to the paintwork is caused, rectify the damage immediately.
  N91-11238

Installing: > < Removing and installing front bass loudspeakers