volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Description of back of dash panel insert > < Renewing dash panel insert

Polo Mk5

Removing and installing dash panel insert
Removing and installing dash panel insert
  Note
Before renewing the dash panel insert, the work procedure „Renewing dash panel insert“ should always be carried out in order that the data stored in the control unit can be read → Chapter.
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
  Note
There is no need to remove the steering wheel.
–  Pull out steering wheel fully and engage steering wheel in lowest position.
–  Remove the upper part of the steering column trim → General body repairs, interior; Rep. gr.68.
   
–  Remove securing bolts -arrows- from dash panel insert.
–  Pull dash panel insert out of dash panel taking wiring harness length into consideration.
–  Disconnect connector.
Installing:
Installation is carried out in reverse order of removal.
  N90-10077

Description of back of dash panel insert > < Renewing dash panel insert