volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing headlight range control regulatorE102 and switch and instrument illumination regulatorE20 > < Lights and switches in dash panel

Polo Mk5

Removing and installing light switchE1
Removing and installing light switch -E1-
The following components are integrated into the light switch -E1-:
t  Fog light switch -E7-
t  Rear fog light switch -E18-
t  Bulb for illumination of light switch -L9-
t  Automatic headlight control
Removing:
–  Switch off ignition and all electrical consumers.
–  Turn rotary grip of light switch to position „0“.
   
–  Push in rotary grip of light switch -1- and turn it slightly to the right -2-.
–  Hold rotary grip in this position and pull light switch out of dash panel using rotary grip -3-.
  N96-10774
–  Disconnect connector -1-.
Installing:
–  Fit connector to light switch.
  N96-10775
–  Hold light switch firmly in place, push in rotary grip of light switch -1- and turn it slightly to the right -2-
–  Hold rotary grip in this position and insert light switch in dash panel -3-.
–  Turn rotary grip to „0“ position, release and engage switch.
  N96-0218

Removing and installing headlight range control regulatorE102 and switch and instrument illumination regulatorE20 > < Lights and switches in dash panel