volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Lights and switches in dash panel > < Lights and switches in engine compartment

Polo Mk5

Removing and installing bonnet contact switchF266
Removing and installing bonnet contact switch -F266-
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove bonnet lock.
LHD vehicle → General body repairs, exterior; Rep. gr.55
RHD vehicle → General body repairs, exterior; Rep. gr.55
   
–  Disconnect connector near right headlight -arrow- and release wiring to bonnet contact switch -F266- from wiring retainers.
  N96-10778
–  Release locking lug -1- and push bonnet contact switch -F266- in direction of -arrow-.
–  Take contact switch out of lid lock.
Installing:
Installation is carried out in reverse order of removal.
  N96-10468

Lights and switches in dash panel > < Lights and switches in engine compartment