volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Tail light > < Daytime running lights
Removing and installing daytime running light bulb in fog light
Removing and installing daytime running light bulb in fog light
Daytime running light bulb is integrated in fog light.
Removing:
–  Switch off ignition and all electrical consumers.
–  Remove fog light → Chapter.
   
–  Turn bulb holder -1- in direction of -arrow- and take out of fog light housing.
  N94-11698
–  Insert daytime running light bulb -2- into holder -1- and turn daytime running light bulb -2- in direction of -arrow-.
–  Pull daytime running light bulb -2- out of bulb holder -1-.
Installing:
Installation is carried out in the reverse order. When installing observe the following:
–  Check function of daytime running lights.
  Note
Do not touch bulb glass when fitting bulbs. Fingers leave traces of grease on the glass, which evaporate when the bulb is switched on and cause the glass to cloud over.
  N94-10345

Tail light > < Daytime running lights