volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Renewing front turn signal bulb > < Renewing side light bulb
Renewing headlight main beam bulb
Renewing headlight main beam bulb
The left headlight main beam bulb -M30- and the right headlight main beam bulb -M32- can be checked by the final control diagnosis for the onboard supply control unit -J519-.
  Note
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
  Note
t  The illustrations show how to change the bulb of the left headlight.
t  The bulb of the right headlight is replaced in the same way.
   
–  Remove cover cap -2-.
  N94-11721
–  Turn bulb holder together with headlight main beam bulb -1- in direction of -arrow-. Pull bulb holder together with headlight main beam bulb out of headlight as far as wiring allows.
  N94-11725
–  Pull headlight main beam bulb -2- in direction of -arrow- out of bulb holder -1-.
Installing:
  Caution
When installing cover cap, ensure cap is seated correctly. The ingress of water will lead to permanent damage to the headlight.
Installation is carried out in the reverse order. When installing observe the following:
–  Check headlight functions.
–  Checking headlight settings and adjusting headlight if necessary „Maintenance manual“ → Booklet
  N94-11734

Renewing front turn signal bulb > < Renewing side light bulb