volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Parking aid control unitJ446 final control diagnosis > < Parking aid control unitJ446

Polo Mk5

Removing and installing parking aid control unitJ446
Removing and installing parking aid control unit -J446-
Removing:
–  Switch off ignition and remove ignition key.
–  Remove right side panel trim in luggage compartment → General body repairs, interior; Rep. gr.70.
   
–  Pull out bracket -1- together with control unit -2-. This damages the securing points of mounting in body. When installing, use a new mounting.
  N94-11738
–  Release and disconnect connectors -2- and -3-.
–  Press catches together -arrows- and remove parking aid control unit -J446--1- from mounting.
Installing:
Installation is carried out in the reverse sequence.
  N94-11739

Parking aid control unitJ446 final control diagnosis > < Parking aid control unitJ446