Volkswagen Workshop Service and Repair Manuals > Polo Mk5 > Vehicle electrics | Electrical system | Starter-current supply-CC | Starter, vehicles with dual clutch gearbox (DSG) | Starter, vehicles with 1.4 l, 132 kW TSI engine and dual clutch gearbox (DSG) DQ200-7F | Removing and installing starter, vehicles with 1.4 l, 132 kW TSI engine with dual clutch gearbox (DSG) DQ200-7F

Removing and installing starter, vehicles with 1.4 l, 132 kW TSI engine with dual clutch gearbox (DSG) DQ200-7F

Special tools and workshop equipment required

t	Torque wrench -V.A.G 1331-

t	Torque wrench -V.A.G 1332-

Removing:

–	Open lid -A- of main fuse box.

–	Undo and detach positive wire from main fuse box.

–	Release and disconnect connector -1- and remove protective cap -2-.

–	Unscrew securing nut -1- and remove positive wire -2- from connector thread of solenoid switch.

–	Remove securing bolts for starter -arrows-.

–	Remove starter upwards out of vehicle.

Installing:

Install in the reverse order of removal. When doing this, note the following:

–	Tighten threaded connections to torques specified in assembly overview → Chapter.