WARNING It is not permissible to test or charge batteries whose colour indicator is light yellow. Do not slave/jump start the vehicle! |
Danger of explosion when checking and charging or slave/jump starting. |
These batteries must be renewed. |
|
–
| Select „Service test“ in the menu. |
–
| Select „On battery terminal“ or „On jump-start point“. |
–
| Select battery type „Normal“, „AGM“, „2*6V“ or „Gel“. |
–
| Select „CCA“, „JIS“, „DIN“, „SAE“, „IEC“ or „EN“ norm. |
–
| Measure temperature. Hold temperature sensor about 5 cm above one battery terminal until temperature stabilises. |
–
| Print out test log if necessary. |
|
|
|