| Notes on releasing and dismantling contact housings |
Note | t
| Observe the general notes on repairs to the vehicle electrical system → Chapter. |
| t
| To release, always use the correct release tools. Under no circumstances should the contacts be pulled out of the contact housings with force. |
| t
| Damaged contact housings must always be replaced. New contact housings can be ordered from the OTC in Kassel. |
| t
| As an aid to disengage the secondary locking mechanisms, a small screwdriver can be used. |
| t
| The socket/pin assignment can be found stamped on the secondary locking mechanism or on the rear of the contact housing. |
|
|
|
