volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Relay Box|Locations
Page 1
background image

Grounding Point: Customer Interest
Engine - Poor Driveability

Group: 24
Number: 94-01
Date: January 20, 1994

Subject:
Poor driveability

Model(s): 
All models with Oxygen Sensor

From 1980 m.y.

Condition

Poor driveability may be caused by magnetic interference due to a deteriorated Oxygen Sensor (O2S) wire shield or improper Oxygen Sensor (O2S) wire
shield Ground (GND) connection.

Production

No change.

Service

check the O2S wire for damage and proper GND connection; replace O2S wire harness and/or clean and tighten Ground (GND) connection as necessary

If Oxygen Sensor (O2S) wire and Ground (GND) connection appear to be OK,

remove Oxygen Sensor (O2S) wire from Engine Control Module (ECM) harness connector, see appropriate wiring diagram for proper connector pin
number

test drive vehicle; if driveability condition is eliminated, replace O2S wire harness

CAUTION

Part Numbers are for reference only Always check with your Parts Department for latest parts information.

Part Information

All Technical Service Bulletins: > < Relay Box|Locations